Heavy-Duty Jumbo Stands

The KUPO Heavy-Duty Jumbo Stand series offers three professional-grade variants built for the most demanding production environments. Each model is engineered with safety, stability, and ease of use in mind, making them a trusted choice for photographers, videographers, and cinematographers who need reliable heavy-duty support on set.

721M – 2-Section Hand-Cranked Jumbo Stand

The 721M is a two-section hand-cranked stand with a load capacity of up to 100kg and a minimum working height of 108cm. Its 106cm spread diameter makes it especially suitable for layer truss platforms. The structure combines iron telescopic tubes, aluminum alloy columns, and foot tubes with 30x30mm square foot tubes for maximum strength and stability.

The gear plate hand-crank mechanism uses a ratchet handle that inserts and rotates following arrow instructions for easy height adjustment. An ergonomic large handle makes operation comfortable and effortless, while an anti-backlash device prevents sudden equipment drops. Each telescopic tube has a maximum extension marking line for safe use. The detachable handle stores in a safety-latched slot on the upper seat during transport. A level gauge on the upper seat helps confirm stand levelness. It comes with 6″ brake casters (KC-160C) and the optional pneumatic wheel set (KC-254C). All assembly uses stainless steel screws and nuts to prevent rust.

744M – 4-Section Jumbo Stand

The 744M is a four-section stand built from chrome-plated steel, supporting loads of up to 70kg / 154 lbs and reaching a maximum height of 4.7m / 15.4ft. It features a direct drive gear mechanism and auto-locking system, delivering superior performance over traditional pulleys and cables. Each riser has an oversized T-handle for maximum torque, and dual handles at the base make folding straightforward. The 28mm junior receiver at the top includes eyelets for guy wires for added stability in challenging conditions. Integrated braking wheels allow safe repositioning, and the optional pneumatic wheel set (KC-254C) makes outdoor movement effortless.

756M – 5-Section TÜV Certified Cranking Stand

The 756M is a five-section heavy-duty cranking stand built from chrome-plated steel, supporting loads up to 70kg / 154 lbs and reaching a maximum height of 6.1m / 20ft. It shares the same direct drive gear mechanism and auto-locking system as the 744M, with oversized T-handles on each riser, dual base handles, and a 28mm junior receiver with guy wire eyelets. Integrated braking wheels and the optional pneumatic wheel set (KC-254C) are also available. The 756M carries TÜV certification, confirming it meets industry safety standards. It is ideal for use with fixtures such as the Godox MG6K, Aputure Storm XT52, and Nanlux Evoke 5000B.

Features

721M – 2 Sections

• Load capacity up to 100kg with maximum working height of 1.72m
• 106cm spread diameter — ideal for layer truss platforms
• Iron telescopic tubes, aluminum alloy columns, and square foot tubes
• Gear plate hand-crank with anti-backlash device and detachable handle
• Level gauge on upper seat and safety-latched handle storage slot
• Comes with 6″ brake casters (KC-160C) — optional pneumatic wheel set (KC-254C)
• Stainless steel screws and nuts for rust-resistant assembly

744M – 4 Sections

• Load capacity up to 70kg / 154 lbs with maximum working height of 4.7m / 15.4ft
• Chrome-plated steel with direct drive gear mechanism and auto-locking system
• Oversized T-handles on each riser for maximum torque
• 28mm junior receiver with eyelets for guy wires
• Dual base handles for easy folding and integrated braking wheels
• Optional pneumatic wheel set (KC-254C)

756M – 5 Sections

• Load capacity up to 70kg / 154 lbs with maximum working height of 6.1m / 20ft
• Chrome-plated steel with direct drive gear mechanism and auto-locking system
• Oversized T-handles on each riser and dual base handles for easy folding
• 28mm junior receiver with eyelets for guy wires
• Integrated braking wheels and optional pneumatic wheel set (KC-254C)
• TÜV certified for verified industry safety compliance
• Ideal for Godox MG6K, Aputure Storm XT52, and Nanlux Evoke 5000B