Modulus Truss Rigging Accessories

Build your rig with NSH Modulus Truss Accessories, including adapters, clamps, plates, offsets and mounting components for different production setups.

Camera, Slider and Mounting Plates

L-Camera Plate: Aligns professional camera packages with the Modulus Truss centreline through lateral and vertical adjustment. Its L-shape supports both directions and carries up to 30 kg. Three adjustment slots (two curved and one straight) feature threaded camera screw holes. Other mounting points use 3/8″ through-holes.

Slider Mounting Plate: Connects an NS-Slider to a Modulus Truss beam. Supplied as a pair, with one plate for each rail end, it transfers slider loads to the frame and allows positioning along the beam using the standard Modulus Truss hole pattern. Each plate includes four 3/8″ rail screws and four threaded beam holes. Choose M16 or 5/8″ versions; the M16 version includes eight M16x30 flange bolts.

Cheese Plate: Fits flat on a Modulus Truss cube face and provides labeled 5/8″, 3/8″, M10 and M12 threaded holes. Four M16x30 flange bolts are included. The Cheese Plate & Modulus Truss Insert provides the same hole field for NSH-side mounting.

Mitchell Flat Bowl: Provides a female Mitchell receiver for Modulus Truss. The plate rests on the frame and the mounted component’s Mitchell nut holds it down. It remains unsecured until tightened. A separate Safety Disc is available to secure it independently.

Mitchell Plate (Male): Adds a male Mitchell spigot beneath a Modulus Truss build for mounting an arm onto a dolly or another Mitchell receiver. Includes four M16x30 flange bolts.

Mitchell Riser Support: Adds a Mitchell mount with clearance beneath it for camera head installation and access to the Mitchell nut. Supports overslung and underslung configurations. Includes four M16x30 flange bolts.

Adapters, Offsets and Rotation

Offset Bowl, 25 cm (10″): Moves a mount 25 cm center-to-center from the Modulus Truss. Its NSH insert seat accepts separately ordered Mitchell plates, 100 mm and 150 mm bowls, and Euro clamps. Also available in 35 cm. Includes four M16x50 flange bolts and nuts.

Offset Bowl, 35 cm (14″): Moves a mount 35 cm center-to-center from the truss. The longer offset has an NSH insert seat for separately ordered Mitchell plates, 100 mm and 150 mm bowls, and Euro clamps. Also available in 25 cm. Includes four M16x50 flange bolts and nuts.

Euro Mount Adapter Plate: Adds a male Euro spigot to Modulus Truss for classic Euro accessories, including bazookas and offsets. Includes four M16x30 flange bolts.

Euro Clamping Mount: Provides a female, clamped 80 mm Euro receiver for classic Euro accessories and mounting a Modulus Truss arm onto a column dolly. Includes four M16x30 flange bolts and nuts.

Rotating Adapter: Enables Modulus Truss rigs to rotate using a high-end bearing rated for one tonne of centric load. It maintains tightness under satellite rigs and long cantilevered builds. Its open center allows components or cables to pass through the rotation axis. Compatible with Mx|66| and Mx|99|. Includes eight M16x30 flange bolts.

Clamps, Supports and Rigging

Adjustable Position Support Foot: A heavy-duty levelling leg for Modulus Truss builds. Use the same sockets and ratchet as the flange bolts to level it, without carrying another tool. Includes four M16x50 flange bolts.

Junior Pin Receiver (28 mm): Provides a female 28 mm receiver for junior pins, lights and rig components. Secure the inserted item with the side screw. Includes four M16x30 flange bolts.

Scaffold Tube Clamping Mount, 48.3 mm (1-1/2″): Secures a 48.3 mm scaffold tube to Modulus Truss. Its aligned profile allows the tube to pass through the truss section. Install vertically or horizontally. The repositionable clamp lever stays accessible. Includes four M16x30 flange bolts.

Scaffold Clamp Plate: Adds a universal adjustable-range clamp to Modulus Truss for scaffold and speed rail sizes. Mount it above or below the truss and run tubes for pulley rigs, lights or other shot requirements. Includes four M16x40 flange bolts and nuts.

Lifting Eye Adapter Plate: Provides an eye bolt attachment point for hanging the frame from a motor or lifter, attaching a line or connecting other rigging components. Includes four M16x40 flange bolts and nuts.

Counterweight Mount Adapter: Fits into the Modulus Truss connector and carries counterweights horizontally or vertically. Uses the same mount found on NSH dollies.

Key Features

• Adapters, plates, clamps, offsets and supports for Modulus Truss
• Camera alignment plate with 30 kg load capacity
• 25 cm and 35 cm offset bowl options
• Mitchell, Euro, Junior Pin and scaffold mounting options
• Slider mounting plates supplied in pairs
• Rotating adapter with one-tonne centric load bearing rating
• Levelling foot uses existing flange bolt tools
• Multiple mounting and rigging configurations